Product Description
The EFC5610-7K50-3P4-MDA-7P-SVPNN-L1NN frequency converter produced by Bosch Rexroth experiences a derating of 1% for every 100m increase in altitude above the standard elevation. This converter is intended for storage between -20°C and 60°C. Its “b0.00” parameter must be set to 2 to enable advanced parameters. The existing parameter values of this device can be changed using the Up and Down arrow keys. The product functions in sensorless vector mode to enhance the performance of the motor without using a separate feedback device. The converter portrays an undervoltage when the DC bus voltage is less than 430VDC. The device operation should take place only after reading the safety instructions and understanding its appropriate use.
The product should never be used when there is extreme temperature fluctuation or the maximum temperature in the surroundings is very high. The device comprises a startup torque that is 200% of the rated torque at 0.50Hz frequency. The two analog inputs of the unit have a voltage rating of 0/2 V to 10V and a current rating of 0/4 mA to 20mA. The converter carries out various functions such as power loss restart, carrier frequency automatic adjustment, torque boost, slip compensation and more. The frequency of this unit is meant to be set using the potentiometer in the operating panel.
The device has a relative humidity of less than or equal to 90% without condensation. The product comes with RCM and EAC certification. The converter must take load factors into consideration if the ambient operating conditions are exceeded. The unit shows 1% power derating for every 4V lesser than 380V. Its output current gets lowered when there is an increase in the carrier frequency to maintain more or less constant power dissipation in the power section. This EFC5610-7K50-3P4-MDA-7P-SVPNN-L1NN converter is sent to anywhere in the world through well-known logistics freight carriers with backup support for one year.
Wake Industrial Warranty
