Product Description
The EFC5610-55K0-3P4-MDA-7P-FCPNN-L1NN frequency converter produced by Bosch Rexroth is by default started or stopped using the operator panel. The product requires rotational auto-tuning of its parameters for standard vector control. The acceleration time of the device has to be increased if there is an overcurrent during acceleration. The unit can function in heavy-duty as well as normal-duty mode. It has a default 4k carrier frequency. This converter has IP 20 protection rating and makes mounting inside a control cabinet essential. The product storage should be done between -20°C and 60°C temperature range. The device connection with the motor is to be established using a screened or armored cable that has to be grounded.
The motor used with the converter must be earthed separately. The U, V and W output terminals of the unit is connected to the motor. Its Set key can be used to make changes to the parameter value and save the changes. The parameters of the product are set to factory defaults if they are incorrect and the motor does not run. The device is equipped with the ability to support switch between two sets of parameters by implementing the parameter set switch function. The parameter settings of the unit can be protected against unauthorized access with the help of a user password. This user password can be any value from 1 to 65,535.
The frequency adjustment of the product using the Up and Down buttons is not affected by password protection. The device operates in sensorless vector control mode only for high-performance control applications. The unit can drive only one motor in this mode. Its output voltage can be kept constant within the specified range by the automatic voltage stabilization function. The product has greater than 95% efficiency. This EFC5610-55K0-3P4-MDA-7P-FCPNN-L1NN converter can be shipped without damage to your destination with warranty support for one year.
Wake Industrial Warranty
