Product Description
The Bosch Rexroth EFC5610-45K0-3P4-MDA-7P-FCPNN-L1NN frequency converter has the possibility of getting damaged if connectors are removed or added with the power supply ON. The product has a maximum of 332 Ohms load resistance for its analog current output. The device may cause radio interference if it is used in a residential environment with an external EMC filter. This unit must be connected to the motor using the shortest possible cable. Its LED panel can be removed if needed. The converter allows parameter value modification through the digit shifting function. The switches of this product are to be switched OFF when the wiring is being checked.
The setting frequency should be highlighted on the display after the converter is powered ON. The output frequency of the device is by default set with the potentiometer present on the operating panel. The sequence of any two phases of its output terminals must be changed if the motor runs in the reverse direction. The parameter initialization function helps to restore the factory default factory settings when the unit is not capable of driving the motor because of the wrong parameter settings. The X5 digital input of this frequency converter can receive a pulse signal with a duty ratio of 30% to 70%. The EFC5610-45K0-3P4-MDA-7P-FCPNN-L1NN converter has one-year warranty backing.
The pulse input of this converter encompasses a default setting of 0.001 seconds for the filter time. The product has 16 stages for its simple PLC control and multi-speed control. Its I/O module depicts four relay outputs. The device uses a RS485 standard communication interface and a ModBus standard communication protocol. Its LED panel has buttons to execute Run and Stop commands. This unit has not more than 90% relative humidity without condensation. The power rating of the converter must be selected based on the motor rated power. We can ship the converter to the desired destination through logistics agents like USPS and UPS.
Wake Industrial Warranty
