Product Description
The EFC5610-2K20-1P2-MDA-NN-NNNNN-L1NN is a single-phase frequency converter with a motor power rating of 3.0 hp (2.2 kW). Its mains voltage equals 1AC 200–240 V ±10%, it weighs 2.6 kg, and its frequency range during operation is 50/60 Hz. It leverages a Modbus RTU type Fieldbus interface. The design of this equipment lacks an LED display that helps to facilitate parameterization, diagnostics and other user-specific interactions. A potentiometer exists on the EFC5610-2K20-1P2-MDA-NN-NNNNN-L1NN, and it helps to tune the equipment to the desired frequency of operation within the acceptable range.
The housing cabinet of the EFC5610-2K20-1P2-MDA-NN-NNNNN-L1NN conforms with the IP 20 protection category, and it comes with an integral EMC filter that belongs to class C3. With 100 % rated data, the allowable environmental temperature during operation is -10 ≤ oC ≤ 45. At every 100 meters above the acceptable 1000 meters installation altitude, the output power of the EFC5610-2K20-1P2-MDA-NN-NNNNN-L1NN experiences a 1 % reduction. The operation of this unit runs efficiently at a relative humidity (RH) ≤ 90 %. At 0.5 Hz maximum SVC, the start-up torque of this equipment is 200 %. In accordance with EN 50178, the allowable pollution class is 2.
The auto pulse (PWM) frequency adjustment of the EFC5610-2K20-1P2-MDA-NN-NNNNN-L1NN dependent on load. It also features an integrated sequential control circuit and a PID controller. When operated in High-Definition mode, the rated continuous output current of the EFC5610-2K20-1P2-MDA-NN-NNNNN-L1NN is 10.1 Amps at 0.2 kV and 8.4 Amps at 0.24 kV. According to EN 61800-3 C3, the external and internal motor cable length of this frequency converter is 30 m and 15m respectively. Its digital and analogue frequency resolutions are 0.01 Hz and 0.4 Hz. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
