Product Description
The Bosch Rexroth EFC5610-22K0-3P4-MDA-7P-FCPNN-L1NN is an advanced EFC 5610 series frequency converter. The input of the converter has a voltage rating of 400 Volts AC (three-phase). The output of the converter has a power rating of 22 kilowatts. The converter comes loaded with a specific firmware variant that supports Sytronic functionality FcP. The motor control method supported by the converter is SVC. Flex control with standard I/O is also supported. The EFC5610-22K0-3P4-MDA-7P-FCPNN-L1NN also supports the safe torque off safety feature. Bosch has designed the frequency converter for vertical installation. For converters that are arranged one above the other, care must be taken to ensure that heated air from the lower converters does not enter the air inlet of the upper converters. Horizontal spacing is not required between 22 kilowatt rated converters that are mounted side by side.
The minimum vertical spacing for 22 kilowatt rated converter is 125 millimeters. The device has IP20 protection rating and needs to be mounted inside a control cabinet. The converter can be wall mounted and can also be mounted on a DIN rail. The EFC5610-22K0-3P4-MDA-7P-FCPNN-L1NN has integrated support for the Modbus communication protocol. A seven-segment display with a potentiometer is also available on the device. The display can show display parameters, settings, status codes and error / warning codes. The potentiometer can show the set frequency. The default carrier frequency for 22 kilowatt converters operating in heavy duty mode is 6 kilohertz. The default carrier frequency for 22 kilowatt converters operating in normal duty mode is 4 kilohertz. The carrier frequency range for the EFC5610-22K0-3P4-MDA-7P-FCPNN-L1NN is 1 to 15 kilohertz. Trained and qualified personnel should install the converter and associated machinery. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
