Product Description
Bosch Rexroth is producing a range of motion control equipment. The company offers high-quality products at an affordable cost. The products include frequency converters, inverter modules, and mains filters.
The EFC5610-18K5-3P4-MDA-7P-FCPNN-NNNN model is a frequency converter with advanced technological developments by Rexroth Indramat. The EFC5610 frequency converter is used to achieve high operational reliability and control under extreme loading conditions. The converter unit has dimensions as 165mm x 315mm x 241mm (W × H × D) contributing to a net weight of 8 kg. The frequency converter can be mounted easily with M6 screws owing to its compact design. The installation must be done by qualified personnel, following the installation guide. The model operates by getting electrical power directly from a 3-phase power supply of 400 V (380 – 480 V) with a tolerance of -15% to +10%. The model comes with L1, L2, and L3 terminals dedicated for mains supply, while U, V, and W are dedicated to converter output. The frequency converter comes without a brake resistor but it can be connected externally by using the ‘B’ terminal. The EFC5610 frequency converter comes with the IP20 protection category. For further protection, it is recommended to be installed in a separate switch cabinet.
The model EFC5610-18K5-3P4-MDA-7P-FCPNN-NNNN can bear 150% overload for 60 seconds. The model comes with Dynamic Braking (DBr) system. The frequency converter provides a speed control in the range of 0 – 400 Hz. The model is equipped with a seven-segment display that informs about the various operational parameters. The converter module when installed should be provided with 125mm space (above and below) for ventilation purposes. The converter unit uses natural air to dissipate excessive heat to the surrounding air. Wake Industrial provides worldwide shipping for this product (EFC5610-18K5-3P4-MDA-7P-FCPNN-NNNN).
Wake Industrial Warranty
