Product Description
The EFC5610-15K0-3P4-MDA-7P-SVPNN-L1NN belongs to the EFC 5610 family of frequency converters, designed and manufactured by Bosch Rexroth. These frequency converters control the speed of permanent magnet motors and reduce drive system costs with sensorless vector control (SVC) technology. The EFC5610-15K0-3P4-MDA-7P-SVPNN-L1NN is an energy-conserving device that uses this efficient vector control to produce high torque operations. Its design makes it easy to assemble and install within the drive system. Input-output connections with the converter are aided by simple wiring - as they are done through pluggable connection terminals.
The standard communication interface used by the EFC5610-15K0-3P4-MDA-7P-SVPNN-L1NN is Modbus RTU. It also supports Multi-Ethernet interfaces with Sercos, PROFINET, EtherCAT, and Modbus/ TCP and Fieldbus interfaces like CANopen and PROFIBUS. It features the standard control section configuration and uses a three-phase rated AC voltage of 380 V to 480 V (-15 %/+10 %). This voltage is supplied at an input frequency of 50/60 Hz (±5 %). The frequency converter was also designed with a built-in brake chopper of 22 kW, an internal EMC filter, and an external brake resistor.
Using the free ConverterWorks or IndraWorks Ds software tools by Bosch Rexroth, the EFC5610-15K0-3P4-MDA-7P-SVPNN-L1NN can be operated remotely from a PC. Data such as converter speeds and other parameters can be specified and saved using these software tools. Connection to the frequency converter can be achieved using a standard USB port on the converter. LEDs indicate the state of the drive’s operation and fault signals on the removable user panel of the EFC5610-15K0-3P4-MDA-7P-SVPNN-L1NN. Its user panel also carries a 5-digit, 7-segment LED display for information for its operation. It is rated IP 20 according to IEC 60529 and requires an ambient operating temperature between 10° C and 45° C.
Wake Industrial Warranty
