Product Description
The EFC5610-0K75-1P2-MDA-NN-NNNNN-NNNN is an advanced frequency converter. It belongs to EFC 5610 produce range from Bosch Rexroth. Due to presence of high voltages and currents inside the device, Bosch recommends that only trained and experienced personnel should be permitted to operate and maintain the frequency converter. Furthermore Bosch recommends that the device should not be operated unless it is properly grounded. Capacitors used in the device must be allowed to discharge completely before any work is performed. The design of the EFC5610-0K75-1P2-MDA-NN-NNNNN-NNNN usually requires a minimum of 5 minutes for the voltage on the capacitors to fall to 50 Volts. However, to ensure safety of personnel and equipment is it recommended to allow the capacitors to discharge completely. A daily visual inspection is recommended to ensure that any condensation which may have formed or any dust which may have accumulated can be removed.
The EFC5610-0K75-1P2-MDA-NN-NNNNN-NNNN comes in an IP 20 rated enclosure which is designed for vertical mounting. Standard communication interface available on the converter is serial which supports RS-485 communication protocol. The EFC5610-0K75-1P2-MDA-NN-NNNNN-NNNN comes with an additional Modbus interface. Rater power output of the naturally cooled EFC5610-0K75-1P2-MDA-NN-NNNNN-NNNN is 750 Watts. Input rating of the device is 200 Volts AC (200 to 240 Volts AC, ±10%). The converter only supports single-phase input at 50 /60 Hertz line frequencies. Motor control algorithm supported by the converter is SVC (standard vector control) which allows 200% of rated toque at 0.50 Hertz. The EFC5610-0K75-1P2-MDA-NN-NNNNN-NNNN also includes an EMC filter and supported flex control with standard input / output. Main functions supported by the EFC5610-0K75-1P2-MDA-NN-NNNNN-NNNN include PID control with sleep / wake function and simple PLC control with 16 stages stop / pause control. This unit can be shipped globally with a one-year warranty period from Wake Industrial.