EFC5610-0K75-1P2-MDA-7P-NNNNN-NNNN

Product Description

The Bosch Rexroth EFC5610-0K75-1P2-MDA-7P-NNNNN-NNNN is an EFC 5610 series frequency converter. It is designed for vertical installation only. If one frequency converter is installed above another, then care must be taken to ensure that the upper threshold of air temperature into the air inlet is not exceeded. Bosch recommends use of an air guide between adjacent frequency converters to prevent hot air from being drawn into the converter installed above. Bosch also recommends a minimum 125 millimeters distance both above and below a mounted EFC5610-0K75-1P2-MDA-7P-NNNNN-NNNN converter. Dimensions of the converter are 206 x 95 x 170 millimeters and its approximate weight is 1.9 kilograms. Recommended temperature range for storage is -25 to 70 degrees Celsius and that for transport is -20 to 60 degrees Celsius. The converter is designed for single phase input at 200 Volts AC.

Normal duty power rating of the EFC5610-0K75-1P2-MDA-7P-NNNNN-NNNN is 750 watts. The output frequency range is 0 to 400 Hertz. Default carrier frequency is 6 kilohertz and range of carrier frequency is from 1 to 15 kilohertz. The EFC5610-0K75-1P2-MDA-7P-NNNNN-NNNN has a rated efficiency of greater than 95%. The converter supports standard vector control (SVC) and has 1:200 speed regulation range and 200% of rated torque at start-up. Design control section of the converter supports flex-control with standard I/O. Standard communication interface on the EFC5610-0K75-1P2-MDA-7P-NNNNN-NNNN is a RS-485 serial interface. Additionally, the converter comes with factory installed Modbus communication interface. Hosing of the EFC5610-0K75-1P2-MDA-7P-NNNNN-NNNN has IP 20 rating and comes with industrial area class C3 EMC filter. The converter has a built-in 7-segment display with potentiometer which can be used for parameter display and viewing status codes, warning codes and error codes. This unit can be shipped globally with a one-year warranty period from Wake Industrial.