EFC3600-2K20-1P2-MDA-7P-NNNN

Product Description

The EFC3600-2K20-1P2-MDA-7P-NNNN frequency converter from Bosch Rexroth is one of the various such devices in the EFC product group. This product features an enhanced V/f motor control. The device supports easy installation using I/O plug-in connection terminals. It must be installed and operated only after reading the installation and documentation manual. The unit should be installed only in industrial machinery and must not be operated outside the ambient conditions. The frequency converter should be used only by qualified and trained personnel. The product is likely to have a high working current and high electric voltage if it is used incorrectly.

The grounding connector of the converter must always have a permanent and non-detachable connection to the power supply unit. The device may experience dangerous movements if there is a fault in the way the associated motor is controlled. It has a rated capacity of 2.2kW. The unit is intended for use between a temperature range of -10°C and +50°C. The product has an output voltage ranging from 0V to the mains voltage. There should be no condensation on the surface of the unit during operation. The EFC3600-2K20-1P2-MDA-7P-NNNN can be sent to your preferred address with a one-year warranty.

The frequency converter has an efficiency of more than 95%. It has a speed regulation range of 1:50. Its multiple speed control functions can be regulated through simple control or PLC terminals. The unit supports a RS 485 communication interface and a ModBus communication protocol. The operating panel is equipped with a 7-segment display and an LED indicator. This LED indicator can indicate the RUN status and the setting direction. The converter has a rated input current of 19.7A. It supports a wall mounting option.