Product Description
The DMA 30A 4101-D is an Indradyn D series three-phase servo drive module. This device uses an RMA/DM 30 backplane module that is equipped with one fan. The switch cabinet has a maximum power loss of 185A. The Bosch Rexroth unit must be installed only in places that are not exposed to high levels of metal vapors, salt, lye, dust, corrosive materials and acid. The drive inverter should be stored ina temperature range of -25°C and +70°C. The hazard warnings must be observed to avoid damage to the product. The device features a modular structure.
The inverter can be fitted into the backplane module. It supports operation in industrial environments when no direct connection is available to a public low-voltage power supply. The construction and rating of the standard variant servo drive module are in adherence to EN 50178 requirements. The position control of the module is achieved through the inverter. The multi-turn encoder has a 32-bit resolution and 4,096 revolutions. The analog interface has a 12-bit resolution and high-speed programmable analog outputs. This interface is a processor board by VeCon Chip with fully digital current, speed and position control.
The three-phase module can be used with inbuilt motors and the manufacturer’s DU, SR and SF motors that have defined encoders. The CE marking indicates that the modules are in adherence to the machinery and low-voltage directives. The constructions and ratings are according to EN 50178 and EN 60204-1 requirements. The module has a power demand of 1.23A from the 24V power supply module. The manufacturer Bosch Rexroth has made its presence felt internationally with its high-quality and high-performance range of electrical products. The servo drive module can be purchased from Wake Industrial with a one-year warranty and shipped anywhere in the world through our delivery agents.
Wake Industrial Warranty
