DMA 030A 7101-D

Product Description

The Bosch DMA 030A 7101-D is a three-phase module. It is designed for use with synchronous and asynchronsou motors from Bosch. The DMA 030A 7101-D is a module which is used in Servodyn-D systems from Bosch. The position, speed and current controllers for three-phase modules are fully digital and are designed in a cascade structure. Dimensions of the DMA 030A 7101-D are: 50 millimeters width, 521 millimeters height and 288 millimeters depth. The three-phase module is air cooled. Bosch recommends a minimum clearance of 100 millimeters on the top side and the bottom side of the vertically mounted module to enable the flow of air which is required for convection cooling. This clearance is also required for easy mounting and dismounting of the module. Output current rating of the DMA 030A 7101-D at 2 kilohertz is 30 Amps.

Power demand of the DMA 030A 7101-D from 24 Volts power supply module is 1.23 Amps. The peak power loss inside the switch cabinet where the module is installed is 180 Watts. Shipping weight of the DMA 030A 7101-D is 7.3 kilograms. Servodyn-D modules such as the DMA 030A 7101-D should be installed inside switch cabinets with IP 54 protection rating. The modules need to be protected from dust, acid, lye and other corrosive elements during operation. Integrated interfaces on the DMA 030A 7101-D include one CANrho interface and a standard encoder interface. For optimal module operation, Bosch recommends the following ambient conditions: maximum installation altitude of 1000 meters and temperature between 5 and 45 degrees Celsius. Rated data for the device will not be valid if the DMA 030A 7101-D is operated outside these ambient conditions. This unit can be shipped globally with a one-year warranty period from Wake Industrial.