Product Description
The DKS01.2-W100A-DS50-01-FW is a servo drive produced by Rexroth Indramat specifically to control the MDD servo motor series in industrial applications. The servo drive is highly durable, efficient, and cost-effective. It can be applied in a broad range of industrial applications such as printing machines, textile machines, paper processing industries, and lots more. It is self-diagnostic; during an emergency, the servo drive alerts the user by displaying an error message on the H1 status display present on the drive's basic unit. Users can also restart the drive by pressing the fault reset button also present on the basic unit. The DKS01.2-W100A-DS50-01-FW drive also helps to monitor and regulate the temperature of the servo motor connected to it.
The DKS01.2-W100A-DS50-01-FW servo drive connects to the motor through the motor feedback connection and the power cable. It sends electrical energy to the motor through the power cable. On the other hand, the motor feedback cable supplies the drive with digital information about the motor in real-time. The drive then uses this information to independently adjust the operation of the motor to suit the parameters stored into the drive controller by the user. All accessories used with the DKS01.2-W100A-DS50-01-FW servo drive must meet the quality standard stated by Rexroth Indramat in the drive's documentation.
The DKS01.2-W100A-DS50-01-FW is designed to operate with a continuous current of 50 Amperes and a rated current of 100 Amperes. It is manufactured by industrial professionals according to the IP10 protection category per DIN 40 050 and insulation category per DIN 570 110. The servo drive receives an input voltage of 3×230 Volts from the mains through its three-phase electrical connection. The servo drive also weighs about 11 kilograms should be strategically installed in positions that allow for air ventilation both in and around the drive. This unit can be shipped globally with a one-year warranty period from Wake Industrial.