DKR03.1-W200N-BE48-01-FW

Product Description

The DKR03.1-W200N-BE48-01-FW Bosch Rexroth drive controller has a function numeric code of 48. The controller features a rated power voltage of 3x 400 to 480VAC +/-10%. The unit must be mounted only after ensuring that there are matching fixing bolts and threaded holes in the rear wall of the cabinet or mounting panel. The product should be operated only if the application conforms to the appropriate national EMC regulations. The controller must not be used with any residual current operated protective device. The drive has a peak current rating of 141A. The device has very little chances of faulty operation due to the monitors in the drive components.

The emergency stop switch of the drive controller must be mounted such that the operator can reach it immediately when needed. This product should be allowed to operate only if the emergency stop is working. It has a total heat dissipation of 1,200W. The device works with the manufacturer’s liner, frameless spindle and AC main spindle motors. The unit has chances of getting damaged if it is operated under non-ambient conditions without considering load factors. The controller must be operated within 1,000m above sea level. The drive controller tends to get overheated due to a dirty heatsink or air inlet.

The drive controller implements a digital servo and resolver feedback for the connected motor. The device can be operated at a maximum temperature of 55°C by taking load capacity into consideration. The closed housing or cabinet in which the unit is installed must adhere to DIN VDE 0160 specifications. The load-dependent energy dissipation by the drive during operation takes place through the inbuilt heatsink and the air vents present at the top. The drive controller has a maximum pressure rating of 160Pa and a noise rating of 68dB(A) at 50/60Hz. This product can be delivered globally with a warranty period of one year.