Product Description
The DKR03.1-W200N-BE11-01-FW drive controller belongs to the DKR product group of devices from Bosch Rexroth. The controller must be installed inside a control cabinet. This product has a line code of 04 and a design code of 1. It is used to monitor and control the operation of the manufacturer’s motors. The device should be installed only in the specified mounting position to avoid damage. There must be a minimum of 160mm clearance distance from the control cabinet for cooling through airflow. The unit should not be mounted or operated if it is damaged or faulty.
The drive controller must be used in its original state without incorporating any structural changes. The product should be operated only in the specified combination and configuration of components using the specified firmware and software. This device must make use of only accessories and parts approved by the manufacturer. It is widely used in printing machines. The unit should not be operated underwater. The controller is likely to feature high discharge current and high voltage during operation. The housing of the product tends to become very hot during operation and can cause burns if touched during this time.
This controller may cause injury to personnel if handled inappropriately. It must be operated by only qualified personnel. The device should not be used in refinery plants, construction cranes, food processing plants and such machinery. The device should never be made to function without a permanent ground connection. The electrical connection points must never be touched if the power supply is on. Its leakage current tends to be over 3.5mA. The clamps and terminals with 0 to 50 volts rating must be connected using only protective low voltage type cables. The DKR03.1-W200N-BE11-01-FW drive controller can be shipped worldwide through logistics partners like DHL, UPS and FedEx with a one-year warranty.
Wake Industrial Warranty
