Product Description
The Rexroth Indramat DKR02.1-W200Z-BE79-01-FW is a drive controller which is designed for the intelligent control of motors. The controller is compatible with AC main spindle motors from the 2AD / ADF product families, frameless spindle motors form the 1MB product family and linear motors from the LSF / LAF product families. DKR drive controllers are available with different power ratings for the precise control of motors with different output power ratings. The DKR series is compatible with three phase input at 400 to 480 Volts AC. The drive can be connected directly to the AC mains without an intermediate transformer. Integrated safety features on the drive include an emergency shutdown device and a mains contactor. A heat sink and blower are also available on the DKR02.1-W200Z-BE79-01-FW. Other drive features include support for digital servo and resolve feedback and SERCOS command communication.
To ensure that the DKR02.1-W200Z-BE79-01-FW matches the customer application, Rexroth requires that the firmware be ordered separately. The function numeric code is 70 and the version of function numeric code is 01. The rated current for the DKR02.1-W200Z-BE79-01-FW is 200 Amps. Mechanical specifications for the drive include 19.3 kilograms weight and enclosure dimensions at 1000 x 440 x 290 millimeters. The housing of the DKR02.1-W200Z-BE79-01-FW has IP 20 protection rating. The drive controller might get damaged if it is operated under ambient conditions which are different than those recommended by the manufacturer. Overloading of the controller can also cause damage. Therefore it is essential that the installers and operators are aware of the safety guidelines, installation instructions and operating conditions which are laid out in the product documentation. Only qualified and experienced should install and operate the DKR02.1-W200Z-BE79-01-FW. This unit can be shipped globally with a one-year warranty period from Wake Industrial.