Product Description

The dkr02.1-w200n-be12-01-fw is a robust drive controller designed for industrial applications. This model belongs to the DKR series and stands out due to its high performance and reliability. The drive controller is specifically crafted to monitor and control the operation of industrial motors used in production machines.

The DKR02.1 drive controller operates on a system frequency of 50 to 60 Hz. It features a three-phase power connector and uses a rated power voltage between 400 to 480 volts. The control voltage for this model is approximately 230 volts. During operation, this drive controller can handle a peak current of 141 amperes. The continuous regenerated power generated by this unit is around 37 kilowatts. Heat dissipation is a critical aspect of drive controllers. The model has a total heat dissipation of 1600 watts. This is managed effectively by an internal air blower. The unit's housing meets the IP20 protection category which means it is protected against solid objects up to 12mm, such as fingers. Weighing approximately 104 kilograms, the DKR series drive controller is built to endure tough industrial environments. The accessory kits for this model weigh between 1 to 7 kilograms. It is designed for installation at heights up to 1000 meters above sea level.

This drive controller dkr02.1-w200n-be12-01-fw integrates seamlessly with Bosch Rexroth?s extensive range of industrial automation systems. The control voltage frequency range for the model is 50 to 60 Hz. The continuous current rating for the controller is 120 A at 4 kHz and 95 A at 8 kHz. The model has a continuous power rating of 37 kW at 8 kHz and 47 at 4 kHz.