Product Description
The DKR 3.1-W200Z-BE34-00 drive controller manufactured by Bosch Rexroth features air cooling mode. The cooling during operation takes place through an inbuilt blower. The product must always be installed in the vertical orientation. The device should never be mounted or operated in a damaged or faulty state. It must be operated only in the configuration and combination indicated by the manufacturer. The unit is a good choice for NC machine tools. This controller should never be put to use underwater. The product has a line code of 3 and a design code of 1. The device comprises a system frequency of 50Hz to 60Hz.
This drive controller may cause electric shock, bodily injury or product damage if it is operated in a tampered state. The product is intended to operate between an ambient temperature range of 5°C to 45°C with rated data. The surface of the device tends to become very hot during operation. This unit should be assembled, installed, stored as well as transported correctly to ensure its safe and optimum operation. It must be ensured before an operation that the safety requirements and regulations for the application are followed. The installation of the product should be done only in commercial machinery.
The controller should not be used in machinery like elevators, construction cranes, refinery plants, and devices used to transport people. The startup of the device must take place only after ensuring that the machine in which the installation is done complies with the safety specifications and national safety regulations pertaining to the application. Its power should be turned ON only after a permanent connection of the ground wire as per the connection diagram. The associated drive must not be operated with a residual current-operated protective device. The DKR 3.1-W200Z-BE34-00 controller with a warranty for one year can be dispatched through one of the several freight carriers.
Wake Industrial Warranty
