DKR 3.1-W200N-BE37-00

Product Description

The DKR 3.1-W200N-BE37-00 is a 49-kg drive controller produced by Bosch Rexroth Indramat. It is sophisticated and has a wide range of application, most especially for the intelligent control of mains, frameless and linear motors and monitoring of their operations. This unit is only recommended for use when the outlined standard operating conditions have been fulfilled. Also, all safety and operating instruction must be followed to avoid the occurrence of injuries and threat to life. The current rating of the DKR 3.1-W200N-BE37-00 has a value of 200 A.

While ordering the DKR 3.1-W200N-BE37-00, an integrated braking resistor can be purchased with the package. The braking system will facilitate the deceleration of the system in the advent of a failure from the mains. Also, this model comes with a pre-installed air blower and heat sink in its housing to relieve the system of excess heat. The DKR 3.1-W200N-BE37-00 allows for the insertion of modules to facilitate its adaptation to specific applications. The firmware of this controller is the same as its operating system and is usually installed as EPROMs on the software modules or aux. plug-in modules. The software module holds all drive parameters, and its contents are transferrable should there be a need for replacement.

The command interface card suitable for the DKR 3.1-W200N-BE37-00 is the SERCOS type. The optional aux. braking system for this equipment has maximum braking energy of 150 kWs, and its continuous power is 1 kW. Also, the brake resistor features a peak power of 40 kW. During operations, the admissible environmental temperature for efficient and optimum operations is within the range of 5 – 45 degrees C. This unit can be shipped globally with a one-year warranty period from Wake Industrial.