Product Description
Manufactured by Bosch Rexroth Indramat, the FWA-ECODR3-FGP-02V18-MS is an AC servo amplifier drive module for the machines in the DKC series. It is simply called an encoder plug-in module and can only be used for the devices in this series. It belongs to the ECODR3 series and features a rated current and DC Bus nominal voltage that is assigned by the factory. It also uses standard firmware and a FW version 2. The release status of the firmware is the status at the time of the update.
The FWA-ECODR3-FGP-02V18-MS can be damaged, or the entire DKC drive, in the case of electrostatic charging present in the tools or people discharged across them. One must be careful of conductive parts like the copper bit, parts and tools and the human body. The control cabinet of the DKC drive consists of different components like the FWA-ECODR3-FGP-02V18-MS. Special care must be taken when it comes to the maximum allowed air intake temperature of these components once they have been arranged in the cabinet. The FWA-ECODR3-FGP-02V18-MS and electronic components must be protected from water so the installer must place the cooling units in a position that it won’t drip water on the electronic components.
One must also prevent moisture condensation of DKC drives that are fitted with the FWA-ECODR3-FGP-02V18-MS which is when the temperature of the drive is below the ambient temperature. It can only function properly when installed in the right ambient conditions and installation position. You can only connect and disconnect the FWA-ECODR3-FGP-02V18-MS plug-in module when they have been dried and completely de-energized. When operating the DKC drive, the encoder plug-in module must be tightened securely. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
