FWA-ECODR3-FGP-01VRS-MS

Product Description

The FWA-ECODR3-FGP-01VRS-MS encoder firmware module is used with DKC drive controllers that are produced by Bosch Rexroth. The standard module has a version code of 01 that is the most basic variant of the three firmware versions. It belongs to the ECODR3 series of such units from the manufacturer. The rated current and the nominal voltage of the DC bus is factory assigned. The module is identified as a firmware by the abbreviation ‘FW’ in the part number. It has a class code of A and is of FGP type. The product belongs to the ECODR3 series of related firmware modules.

The device renders multilingual support. It operates as a FIELDBUS interface. The term RS in the part number indicates the loaded software status update. This unit can be used with drive controllers that function with linear asynchronous and synchronous motors as well as asynchronous kit motors. The operating data of the controller that cannot be altered by the user are stored in its digital drive. The emulation of the encoder used in this device can be either incremental encoder emulation or absolute encoder emulation. The firmware can be delivered with a one-year industrial warranty to any address, in any country, through our reliable logistics agents.

The firmware module is compatible with various drive controllers in the DKC03 to DKC06 series. These controllers are put to use for automation applications in several sectors. There are 11 steps involved in commissioning the drive controller. The power and control sections of this device feature an operating hour control. A preset error message is displayed if the controller identifies an error. The incremental encoder emulation and absolute encoder emulation help to generate positions in the TTL format and SSI format respectively. This ensures that the position control loop can be closed using external control.