Product Description
The DDS03.2-W050-BE45-01-FW drive controller uses a SERCOS interface for command communication. The Bosch Rexroth controller has a function ID code of 45 as fixed and documented by the manufacturer. The product encompasses a Bb ready to operate contact. This contact has a short-term and continuous switching capacity of 24VDC and 1A. The drive controller also has a potential-free response contact. The product is fitted with a type plate on its front that indicates its type designation. The device storage must be done only in a dry place that is free of dust and shock. The unit is widely used in robotics-related applications. Its SERCOS interface uses a fiber optic cable for communicating between the drive and control.
The controller must never be used with an unregulated power supply. The product is to be installed only in machines that are meant for commercial use. The electrical connecting points of this device are not to be touched when the power is turned on. The unit can function at an ambient temperature of 0°C to 45°C. It supports installation at a maximum setup elevation of 1,000m over sea level. The drive controller requires minimum mounting and installation effort. The product is dispatched in custom grade-military packaging to ensure that it does not get damaged.
This drive controller is sized at 355 x 325mm. The device must utilize D subminiature plugin connectors or plugin clamps for its signal lines to assist in unit replacement if required. The unit should come in contact with the human body only after appropriate discharging has been done. Its motor feedback connection is established at the X4 connecting point. The product features connectivity support to a PC or a VT-100 terminal through a RS 232 serial interface. The device incorporates an S1 fault reset key to reset its operation as needed. This DDS03.2-W050-BE45-01-FW controller is available with backup support for one year.
Wake Industrial Warranty
