Product Description
Bosch is the world's top manufacturer of industrial equipment. Drive controllers, control sections, frequency converters, drive converters, brake choppers, and inverter modules are some of the goods offered by the firm.
The DDS03.2-W030-BE32-01-FW model runs at 300-volt direct current bus voltage with a 15 percent tolerance and weighs 5.5 kg. The model is rated for a continuous current of 12 amps and a peak current of 30 amps. The DDS03.2 drive controller is rated IP20 and has an approved maximum relative humidity of 25 g/m3 and a maximum permissible humidity of 95%. This type of motor drive controller enables precise control over the speed and direction of the motor, which is one of its key advantages. This allows you to easily set and maintain certain speeds, as well as change the rotating orientation as needed. The drive controller has a storage and transport temperature range of -30 to +85 degrees Celsius and can function at a maximum temperature of 45 degrees Celsius without losing data. The DDS03.2 drive controller is distinctive in that the majority of the unit's energy loss is dispersed outside, preventing it from accumulating in the control cabinet. The SERCOS interface is the primary communication module of the drive controller.
The model DDS03.2-W030-BE32-01-FW unique module arrangement makes it suitable for a wide range of driving applications. In normal cases, software modules will contain driving instructions, drive settings, and any necessary firmware; however, the firmware for this model must be bought separately. The model is fitted with air conditioning and a digital servo and resolver feedback for monitoring the speed and position of the motor. This item (DDS03.2-W030-BE32-01-FW) is covered by a one-year replacement warranty and will be sent to you promptly by Wake Industrial.
Wake Industrial Warranty
