DDS03.1-W030-RS04-01

Product Description

Bosch Rexroth is always developing in order to offer clients the most effective solutions. Drive controllers, frequency converters, drive converters, power supply modules, brake choppers, and inverter modules are included in the product range.

The DDS03.1-W030-RS04-01 model can be paired with an AC servo and main drives to produce a convenient drive package that requires just one power supply unit. The key benefit of the DDS03.1 drive controller is that it disperses a large quantity of heat outside. The drive controller module's IP 20 certification protects it from dust, but not water. If condensation does not occur, the operating maximum humidity level may exceed 95%. Prior to installation, the operation of the controller must be validated. This Bosch Rexroth series 3 drive controller has a bus voltage of 300 volts DC. The model is equipped with a SERCOS interface communication module, and its attached motor uses 110 W at 15 A of constant current. The model is intended for process monitoring and control, and it incorporates resolver feedback. The DDS03.1 controller's transport temperature range should be between -30 and +85 degrees Celsius. Before a product is delivered to a customer, it is thoroughly tested for defects and sent by a reputed logistics partner.

The model DDS03.1-W030-RS04-01 weighs 5.5 kilograms and must be operated by a highly trained technician. The performance and efficiency of the model are depending on its software. Additionally, firmware is included with the rest of the system. Consequently, it is always possible to repurchase the same firmware version. The firmware is constantly updated to improve performance without affecting functionality. Wake Industrial provides a one-year replacement warranty on this drive controller.