Product Description

The DDS series of highly efficient drive controllers is introduced by Rexroth Indramat. The company manufactures these devices with top-notch quality components to offer high degree of reliability in an automated system. The model DDS02.2-W200-BE31-01-FW firmware is a separate item and needs to be ordered as a separate sub-position. Is passes through a number of inspection and testing procedure to offer hassle-free operation. The DDS02.2 drive controller must be used in conjunction with the motors specified in the user manual including printing machines, packaging machines and robotic devices. These device rely on efficient cooling for uninterrupted data transfer and rapid-response of motor. For this purpose, complete compatibility with the drive controller is necessary. The Indramat DDS unit has a separate port for status display error or error messages, and software module. If comes with a fault reset key which can be used to reset the device when needed. It can be operated at an ambient temperature ranging from 0 to +45 degree Celsius. It communicates using RS-232 interface and provides a separate connection point. The three-phase current cables can be connected at the control board of the DDS2.1 drive controller. The model DDS02.2-W200-BE31-01-FW should be configured prior to use. A trained personnel or commissioning engineer may be awarded the job of installation. An IP10 rated control cabinet or housing may be used to mount this unit. A name plate with basic details is attached to the drive unit which prevents confusion during identification. An integrated blower is available which blows hot air to the cabinet. The heat sink of the power section and blower impeller are outside the cabinet or housing. It comes as configured by the manufacturer and saves time during installation.