Product Description
Bosch Rexroth manufactures high-quality and energy-efficient devices such as drive controllers, servo motors, spindle motors, inverters, brake resistors, and frequency converters.
The DDS02.2-W200-BE15-01-FW model was constructed in a modular fashion to enhance versatility and includes a communication module of the SERCOS interface. Due to the device's modular design, it may be combined with an AC servo and main drives to make a tiny drive package that needs just a single power supply unit to operate. The DDS02.2 drive controller's maximum operating temperature with reduced rated data is +55 degrees Celsius, which may have an influence on performance. The drive controller has a continuous rated current of 65 amps and should be mounted in a control cabinet that is well protected and ventilated from the outside. The model has both digital servo and resolver feedback, and the operating environment must be clean, devoid of turbulence, and devoid of debris. Due to its IP20 protection rating, the DDS02.2 drive controller is not totally liquid-proof, although it does provide some protection against dust. Suspension supports may be added if required during transit, and the temperature should be between -30 and +80 degrees Celsius.
The model DDS02.2-W200-BE15-01-FW has the benefit of dispersing a large percentage of its heat outside of its container, which might be helpful in certain circumstances. The model is compatible with corporate supply units and has a 24 volt DC stable voltage and a 300 volt DC bus voltage. The communication card is plugged into the drive controller's U1 slot, and the firmware module is installed into the drive controller's U5 slot. Additionally, this drive controller (DDS02.2-W200-BE15-01-FW) is rugged enough to survive adverse working conditions such as severe temperatures, moisture exposure, and vibration.
Wake Industrial Warranty
