Product Description
The DDS02.2-W200-BE11-02-FW is a DDS series digital drive controller. It is developed by Bosch Rexroth for industrial and commercial applications. As per the type code, the series of the controller is 2 and the version is also 2. The function ID of the DDS02.2-W200-BE11-02-FW is 11 and the version of the function ID is 02. The controller firmware is ordered separately from the hardware. Rated current output of the DDS02.2-W200-BE11-02-FW is 200 Amps. The controller is designed with heat technology: it dissipates heat inside the cabinet. The recommended ambient temperature range is 0 to 45 degrees Celsius. The minimum recommended spacing on the front side of the mounted DDS02.2-W200-BE11-02-FW is 40 millimeters. The minimum recommended spacing on the top side of the mounted controller is 80 millimeters. The minimum recommended spacing on the bottom side of the mounted controller is 80 millimeters.
Bosch has designed the DDS02.2-W200-BE11-02-FW for vertical mounting. The inlet for the cool air is located on the bottom side of the controller housing. The outlet for the heated air is located on the top side of the controller housing. Because the warm air is released inside the cabinet, the controller has to be mounted inside large cabinets. If large cabinets are not available then air conditioning may need to be used. Both resolver feedback and digital servo feedback are supported. Command communication module installed on the DDS02.2-W200-BE11-02-FW supports SERCOS. This is a standard for serial communication and supports 2/4 Mbps data transfer rates. SERCOS uses fiber optic cables for inter-device communication. The devices on the SERCOS network are arranged in ring topology. Only trained and qualified technical personnel should be involved in controller installation and operation.
Wake Industrial Warranty
