Product Description
The DDS02.2-W100-BE16-02-FW industrial drive controller is a highly sophisticated industrial motor control device produced by Rexroth Indramat under normal operating conditions. This drive controller controls the operation of industrial motors by amplifying the voltage and current it sends to the motor according to the control signals it receives from the control center. This industrial drive controller also requires the connection of a regulated power supply unit to maintain high operational efficiency. Under normal operating conditions, this industrial controller maintains an operational efficiency of about 95 percent; it is also compatible with a wide range of industrial motors such as the MDD synchronous motor, LAR inductance linear motor, and the MKD synchronous motor. The combination of the DDS02.2-W100-BE16-02-FW industrial drive controller with any of these motors forms a perfect rapid response drive for handling machines, robotic machines, food processing machines, and lots more.
The DDS02.2-W100-BE16-02-FW industrial drive controller communicates to the industrial motor through two main types of connecting cables the power cable and the motor feedback cable. The power cable conducts electrical current from the controller into the motor, while the motor feedback cable is used to exchange digital signals between the controller and the industrial motor. It is important to ensure that these two cables are separately wired in the servo system to prevent electrical interference.
The DDS02.2-W100-BE16-02-FW industrial drive controller is not supplied with a firmware module; this should be requested as a separate unit by the drive controller before the motor is switched on for operation. Although this industrial motor features a unique temperature regulation system, industrial operators need to ensure that the controller is not installed at an ambient temperature that exceeds 50 degrees Celsius.
Wake Industrial Warranty
