Product Description
The DDS02.2-W050-BT30-01-FW is a highly advanced industrial motor controller designed by Rexroth Indramat to accurately control the operation of electric motors used in the industrial servo system. This controller is designed according to international quality standards; it features a unique housing unit that is specially designed to protect it from the interference of large solid materials. Although this industrial controller is specially designed to be resistant to the interference of large solid materials, for optimum protection, it should be integrated into an additional control cabinet that offers it minimum protection according to the IP54 protection class. The DDS02.2-W050-BT30-01-FW industrial controller also features a unique modular design that makes it possible for industrial operators to replace any faulty part of the controller without the need to reconfigure the whole servo system.
The DDS02.2-W050-BT30-01-FW industrial drive controller keeps its internal temperature in check through forced ventilation; also integrated into the housing unit of this industrial motor are a built-in fan and a special heatsink that carries out this temperature regulation process. also, this industrial controller should be integrated into a position that exposes it to cool air to aid this temperature regulation process.
The DDS02.2-W050-BT30-01-FW industrial controller is not supplied with a firmware module; this should be specially ordered by the industrial operator as a separate sub-unit. Also, the maximum permissible height at which this industrial controller should be operated is about 1000 meters above sea level; operating the controller above this height can cause a significant reduction in the efficiency of this industrial control device. The DDS02.2-W050-BT30-01-FW industrial controller should be regularly cleaned to prevent the build-up of dust which can interfere with the smooth operation of the controller.
Wake Industrial Warranty
