Product Description
The Bosch Rexroth DDS02.2-W050-BE34-02-FW drive controller portrays a 2 version code. The controller must feature a clearance distance of at least 80mm above and below it (inside its closed housing). The product has three terminals A1, A2 and A3 for the three-phase current connection of its power cables. These terminals must be tightened with M6 size screws that have a tightening torque of 5Nm. The device is cooled by the flow of cool air through the inlet at the bottom and the discharge of hot air through the outlet at the bottom. The unit is mounted on the rear wall of a control cabinet with a mounting panel.
The controller can be operated with a motor of the MKD, MDD, LSF or LAF series from the manufacturer. This product is particularly suitable for use in printing, packaging and textile machines. This device startup should be done only if the machine in which it is installed complies with EC 89/392/EWG machine directives. The unit must have an earth wire connection prior to starting even for testing purposes. It is possible to connect several drive controllers with a single power supply. The controller with the highest output and maximum current rating should be placed close to the power supply.
The device features protection against entry of solid extrinsic objects that have a diameter of more than 50mm. The unit is to be stored and transported between -30°C and 85°C. Its energy loss is based on the continuous current of the connected motor in standstill mode. The controller is cooled by air flow inside the control cabinet. This product may also require air conditioning for its cooling. The signal lines of this device have to be routed away from the supply lines because of interference. This drive controller is available with a year’s Wake Industrial warranty for international shipping worldwide.
Wake Industrial Warranty
