Product Description
The Bosch Rexroth DDS02.2-W015-BT27-01-FW drive controller has 2 version code. This controller operation must take place only if the application adheres to the safety-related regulations and instructions. The product should be used only with spare parts approved by the manufacturer. The device must not be operated even for a brief while without a permanent connection of the earth wire to all its electrical components. The unit is not supposed to be started if its e-stop switch is not working. Its connected motor renders both digital servo feedback and resolver feedback. The drive controller is cooled by heat technology that results in heat dissipation within the cabinet.
The product may require air conditioning for its cooling. The device uses a software module to store its firmware and drive parameters. The unit houses a type plate with the type code that helps to identify the replacement part in case of a failure. Its faceplate and rating plate must be removed when the controller is mounted and refitted after the mounting. This controller has a current consumption of 500mA at 24VDC. The product can operate at a maximum temperature of 55°C with derated data. The device does not have protection against the penetration of water.
The controller is intended to be positioned such that the drive with the highest output and maximum current rating is placed as close as possible to the power supply. The product has three terminals A1, A2 and A3 that are to be connected with M6 screws having a tightening torque of 5Nm. The device should encompass shielded lines for its analog signals. The unit supports an RS 232 interface at the X3 connecting point for connection to a PC or a VT-100 terminal. This DDS02.2-W015-BT27-01-FW controller is available with a year’s Wake Industrial warranty and delivered to the desired destination through reputed freight carriers.
Wake Industrial Warranty
