Product Description
Bosch Rexroth is a global brand with several intelligent drive and motion control units in its portfolio. The digital DDS drive controllers are products by this brand that can be combined with the MDD and MKD synchronous servo motors and the LAR and LAF linear inductance motors to form rapid-response drives. These drives are used in textile machines, handling machinery, and robotics.
The DDS02.1-W200-DS41-00-FW is a Bosch Rexroth drive controller model in the DDS drive system. It is a Version 1 type with the heat technology cooling system where the flow of the cooling air is within the control cabinet housing the drive controller. This necessitates a large control cabinet and an air conditioning system. This control cabinet houses the drive controller and its supply unit and has an Ingress Protection rating of IP 10 according to EN 60529. It will not permit the entry of solid objects over 50mm in diameter but can be penetrated by water. It is also very easy to install and mount, despite its size.
The SERCOS interface of the DDS02.1-W200-DS41-00-FW provides inputs for the evaluation of reference switches, travel range limit switches, and sensor inputs. It allows the digital drive of the system to interact with other components using a fiber optic cable. The drive controller requires a DC bus voltage of 300V with a ±15% allowance and a current rating of 200A. Servo motors with a digital servo feedback system are its compatible motors, and the ideal ambient temperature required for its operation is between 0oC and 45oC. It should also be installed at a 1000m altitude above sea level and with a maximum permissible relative air humidity of 95%.
Wake Industrial Warranty
