Product Description
The DDS02.1-W100-DL08-01-FW is a state-of-the-art industrial drive controller produced by Rexroth Indramat to control the operation of automation systems used in the industrial servo system. This drive controller is a very durable device that meets the IP10 protection class; under ideal operating conditions, the controller maintains an operational efficiency as high as 95 percent making it one of the most efficient drive controllers available for industrial operators. The DDS02.1-W100-DL08-01-FW industrial drive controller does not generate a high amount of noise during operation; it is also manufactured with high metal content, making it possible for industrial operators to recycle it into the new industrial device after its usefulness as a control device has been exhausted. The maximum permissible installation height at which this drive controller can be operated is 1000 meters above sea level; operating the controller above this height can cause a significant reduction in the efficiency of the controller.
The DDS02.1-W100-DL08-01-FW industrial drive controller can be configured to meet the operational requirements of a wide range of industrial machines; the configuration of this controller is done through special modules which are installed into special slots present in the housing of the controller, the configuration operation should also be carried out by well-trained engineers according to the instructions stated in the housing of the controller.
The DDS02.1-W100-DL08-01-FW industrial drive controller regulates its internal temperature by forced ventilation; it contains an internal heatsink and air blower, which carries out this temperature regulation process. The enclosure of this industrial controller does not offer it complete protection from external interference; for complete protection, the controller should be installed in an additional control cabinet that meets at least the IP54 protection class.
Wake Industrial Warranty
