Product Description
The DDS02.1-W100-DG04-00 is a state-of-the-art industrial drive controller produced by the highly trained engineers of the reputable Rexroth Indramat. This drive controller is manufactured according to American and European quality standards; it features a durable housing unit that provides it with complete protection against the interference of solid materials with an external diameter larger than 50 millimeters. This industrial drive controller contains a high metal content; this makes it possible for industrial operators to recycle the controller into other materials once its usefulness and a control device have been exhausted. To protect the integrity of this controller, operators should ensure the configuration, installation, and general operation of this drive controller is drone according to the instructions in the documentation of the controller.
The DDS02.1-W100-DG04-00 industrial drive controller is supplied as a fully configured device made up of software modules, command communication modules, and auxiliary plug-in modules, which are inserted into special slots labelled U1 to U5 on the housing of the controller. This controller also features a modular design that allows industrial operators to replace a faulty part of the drive controller without needing to reconfigure the whole servo system.
The DDS02.1-W100-DG04-00 is a self-diagnostic device; it contains special light-emitting diodes that the industrial operator can use to monitor the operational status of the drive controller in real-time. This drive controller connects to the electrical motor through two major types of electrical cables; the power cable and the motor feedback cable; these two cables must be separately wired to prevent electrical interference. The internal temperature of this drive controller is regulated via natural convection, to facilitate this temperature regulation system, the controller should be installed in a position that allows for the easy movement of cool air in and out of its housing unit.