Product Description
Rexroth Indramat specializes in manufacturing energy-efficient and high-performance drive technology. Their line of products includes servo motors, servo drives, gear technology, embedded computers, and industrial amplifiers. The DIAX 02 drive controllers manufactured by Rexroth Indramat are grouped under their DDS series.
The DDS02.1-W050-RS01-03-FW belongs to the DDS product family. This drive controller is a 2nd series 1st version controller. The DDS02.1-W050-RS01-03-FW has internal cooling to perform to its fullest, even when under extreme loads. This controller has a current rating of 50A and has resolver feedback. The communication module on the DDS02.1-W050-RS01-03-FW has a SERCOS interface. The function ID for this controller is 01, and the version of the function ID is 03. The DDS02.1-W050-RS01-03-FW firmware needs to be purchased separately. The permissible ambient temperature for this unit is between 0°C to 45°C with rated data, while with derated data, this unit can perform up to 55°C. The DDS02.1-W050-RS01-03-FW has an IP 20 rated protection enclosure as per EN 60429.
The DDS02.1-W050-RS01-03-FW can be operated to temperatures exceeding 55°C, but for that, additional heat exchangers need to be installed. When installing additional heat exchangers, it must be ensured that the condensed water does not drip in the air duct of the control cabinet. The DDS02.1-W050-RS01-03-FW IP 20 rated protection cabinet does not prevent water ingress. Water can severely damage the unit and can potentially pose a short circuit and fire hazard. The DDS02.1-W050-RS01-03-FW has several components that may have voltages exceeding 50 volts, and direct contact with them could lead to bodily injury. Always wear protective equipment such as gloves and safety boots when maintaining your unit. This drive controller can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
