Product Description
Bosch Rexroth deals in a wide range of reliable, long-lasting, and cost-effective products like drive controllers, inverter units, and brake resistors.
The DDS02.1-W050-RA01-02-FW model consists of a basic unit (DDS02.1-W050-R) that contains 5 plug-in slots that can be configured according to the required operations. The plug-in slots of this controller only hold the DAE01.1 ANALOG interface with an incremental encoder emulator. The DAE01.1 module is installed in the U1 slot of the controller and the firmware module is mounted in the U5 slot of the basic unit. U2 – U4 slots of the basic unit are not equipped with any module and a cover is placed on them. The DDS02.1 drive controller is designed as per UL standards and is recommended to be used with the accessories, power supply modules, and motors prescribed by the supplier. The controller is not protected against liquids and 12.5 mm solid particles due to its IP20 protection category. A switchgear cabinet of at least IP54 protection is recommended to install this drive controller. The module is suggested to be installed under the ideal temperature range of 0 to +45 degree Celsius, without reduction in drive data. The firmware of the DDS02.1 controller must be ordered as a separate sub-item according to the configuration.
The model DDS02.1-W050-RA01-02-FW comes with a configuration rating plate which is placed at the front of the controller and contains complete information regarding the controller. This controller (DDS02.1-W050-RA01-02-FW) is highly trusted by our clients due to its smooth operations. The module takes input power through L- and L+ terminals through a 24 VDC regulated power supply. To display warning and error messages, an alpha-numeric display is provided in this model. Get this controller now from Wake Industrial.
Wake Industrial Warranty
