Product Description
The DDS02.1-W015-DS50-01-FW is a modular drive controller. Bosch has designed the DDS drive family for use with MKD, MDD and LAR AC motors. DDS drive controllers require a regulated 24 Volts DC power supply. The safety guidelines provided by Bosch in the product documentation should be followed at all times. Proper transport, storage and installation are prerequisites for optimal and safe operation of the drive controller. Appropriately qualified personnel should work on the drive and related equipment. Only spare parts approved by Bosch should be used. Startup of DDS drive is only allowed once it is ensured that the machine in which the drive is installed complies with EC directive 89/392/EWG. The drive should be connected to ground before it is powered on. Coming in contact with drive parts that are carrying voltages in excess of 50 Volts can lead to injury.
Therefore those working on the drive should wait five minutes after disconnecting power before starting any activity. The DDS02.1-W015-DS50-01-FW is rated for 15 Amps output current. The drive features include digital servo feedback and SERCOS communication interface. Firmware for the drive has to be ordered as a separate subposition. A completely configured DDS drive is comprised of a basic unit, plug in module, a software module and the firmware. The software module that is required depends on the selected hardware configuration and the functions of the drive. The software module guarantees that if a unit needs to be replaced, the parameters can be carried over to the new unit. The cooling method used by the DDS02.1-W015-DS50-01-FW is natural convection. The optimal temperature for operation is 0 to 45 degrees Celsius. The recommended altitude is up to 1000 meters.
Wake Industrial Warranty
