Product Description
The DDS02.1-W015-DS11-01 is an intelligent AC drive. It is part of the DDS series from Bosch Rexroth. The command communication module installed on the drive is SERCOS. DDS drives can also be ordered with analog command communication modules. Function ID of the DDS02.1-W015-DS11-01 is 11. The function ID version of the drive is 00. Support for digital servo feedback is available on the DDS02.1-W015-DS11-01 drive. This feature enables the drive to accept feedback from a servo motor. The feedback enables the drive controller to control the speed and position of the motor. The continuous current output of the drive is 15 Amps. The DDS02.1-W015-DS11-01 is an air cooled drive. The recommended ambient temperature range for drive operation without derating is 0 to 45 degrees Celsius. This range is recommended to ensure that the internal temperature of the drive, which is higher than the ambient temperature, does not reach levels that could cause the drive components to fail.
The drive dissipates heat inside the control cabinet. Consequentially larger control cabinets are required. Air conditioning may also be required. The DDS02.1-W015-DS11-01 drive has a modular architecture. The constituent parts of a configured drive controller are the basic unit, the software module, the command communication module, additional plug-in modules, a transparent cover and a rating plate. The controllers are supplied by Bosch as completely in equipped and assembled form for the desired function. The width of the basic unit for the DDS02.1-W015-DS11-01 drive is 105 millimeters. The motor power connection, earthing connection, slot for software module, fault reset button, RS-232 interface and analog I/O are all located on the front panel. Weight of the DDS02.1-W015-DS11-01 drive is approximately 7.5 kilograms.
Wake Industrial Warranty
