Product Description

Bosch Rexroth Indramat is an international engineering company that is renowned for the production and distribution of cost-efficient and sophisticated motion and motion control devices. The company perfectly combines past experiences with new innovations to form unique products that can be effectively used in various industries. The DDS02.1-W015-DS03-00-FW is a drive controller produced by well trained engineers of the reputable Rexroth Indramat. The controller is a safe and reliable device that features a modular design and is intended to be used in conjunction with MDD, MKD, and LAR Rexroth motor series. Under ideal operating conditions, the controller maintains high operational accuracy over a broad motor speed range. The DDS02.1-W015-DS03-00-FW drives are particularly well suited for use in machine tools, textile machines, printing machines, packaging machines, and lots more. The rated input current required by the DDS02.1-W015-DS03-00-FW drive controller during operation is about 15 amperes. The controller is delivered to the end user as a fully configured device that contains a basic unit, plugin modules, software modules and the firmware. The controller can also be connected to all INDRAMAT supply units that that provide it with a regulated DC 24 volt voltage. As a standard, the firmware module is not delivered with the controller, it is the responsibility of the operator to order for the firmware as a separate component. The permissible ambient temperature suited for the DDS02.1-W015-DS03-00-FW industrial controller falls between 0 to about 45 degree Celsius, while the maximum permissible ambient temperature with derated is about 55 degree Celsius. The controller falls under the IP20 protection class, however to ensure optimum protection, the controller should be installed into an additional control cabinet that can provide a minimum protection that meets the IP54 protection category. The total weight of the DDS02.1-W015-DS03-00-FW drive controller is approximately 7.5 kilograms.