Product Description
After years of disrupting the global drive market with the design and manufacture of groundbreaking drive and control units, Bosch Rexroth continues to set the pace for innovation in this space. Servo drives by the manufacturer are highly functional devices that are well-suited for use in different industrial sectors. DDS02.1 drive controllers are manufactured by Bosch Rexroth and are used with MDD, MKD and LAR AC motors. They are rapid-response drives with a modular design that promotes their adaptability to various modules for multiple functions. As a result, they work optimally in equipment such as handling machines, textile and printing machines, robotics, and so on.
The DDS02.1-F100-DA01-01-FW is a configured drive controller in the DSS02.1 series, consisting of plugin modules, software modules and firmware. It is a Version 1 model with a rated current value of 100A. It is cooled using a coolant and this promotes the recovery of lost heat energy from the unit. The drive controller can be connected to motors with digital motor feedback (DSF) and is equipped with an ANALOG interface as its plugin communications module. The DC bus voltage for the operation of the DDS02.1-F100-DA01-01-FW is 300V with a +/- 15% allowance while its maximum peak current and continuous current values are both 100A.
While operating the DDS02.1-F100-DA01-01-FW as part of a system, the ambient temperature at the site of operation should be maintained within limits of 0oC and 45oC. It should also be installed at a maximum height of 1000m above sea level with relative air humidity not exceeding 95%. It has an Ingress Protection rating of IP 20, as it is protected against penetration by solid objects over 12mm.
Wake Industrial Warranty
