DDC01.2-N200A-DS63-01-FW

Product Description

The DDC01.2-N200A-DS63-01-FW from Bosch Rexroth Indramat is an AC Drive Controller that’s designed for use with digital servo drives. There is a wide range of use cases for this equipment, and it is possible to tweak it to suit specific applications. The app-specific parameterization of this unit is achieved through auxiliary plug-in modules and a suitable software module. The DDC01.2-N200A-DS63-01-FW is a series 1 and version 2 product. It is rated at 200 Amperes and features a standard motor noise emission at 100 – 200 Amperes rated current. The continuous current of this unit has an average value of 45 Amperes.

In general, a configured unit of this DDC drive controller is usually equipped with a SERCOS interface command module, a software module and an optional auxiliary plug-in card for optimum operation. In conjunction with the MDD AC motors, a fully equipped and configured DDC01.2-N200A-DS63-01-FW forms a dynamic system configuration. In addition, it comes designed with a direct current (DC) bus rectifier, a bleeder resistor and mains section, with each component serving specific purposes. To accommodate app-specific requirements on this unit, plug-in modules are inserted into its U1 – U5 slots. The protection category of the DDC01.2-N200A-DS63-01-FW is IP 65.

The DDC01.2-N200A-DS63-01-FW generates a lot of heat due to the operation of its bleeder resistor, and for this reason, it must be installed in a manner that allows cooling air to flow in and out. It is usually a maintenance-free drive controller but when used in an acutely polluted environment, extra care and maintenance may be required. The DDC01.2-N200A-DS63-01-FW is best for use under an ambient temperature range of 5 – 45 degrees C. This unit can be shipped globally with a one-year warranty period from Wake Industrial.