Product Description
The DDC01.2-N200A-DL43-01-FW is a three-phase electrical drive controller manufactured by Rexroth Indramat. This drive controller is designed to provide industrial operators with an accurate means of motion control in the servo system, it is a highly durable device that can operate smoothly in harsh industrial conditions. The DDC01.2-N200A-DL43-01-FW industrial controller can be configured by the installation of configuration cards into slots U1 to U5 which is present in the controller’s housing unit. One of the configuration cards used with this controller is the DLC single-axis positioning module. The DLC positioning module helps to integrate the controller to the machine, it contains about 3000 programing blocks each of which is dedicated to specifying one motion sequence or a specific state of the inputs that require monitoring or of the outputs that need to be set.
The enclosure of the DDC01.2-N200A-DL43-01-FW industrial controller meets the IP65 protection class, it features numerous operational interfaces through which it connects to other parts of the servo system. Some of the communication interfaces present on the housing unit of this controller include the RS-232 interface connection for the VT-100 terminal, the motor feedback connection, the interface to the machine controller, and lots more. A fault reset key is also integrated into the housing of the controller. Operators can use this key to restart the controller after an operational error.
The DDC01.2-N200A-DL43-01-FW is an air-cooled controller, it contains a heatsink and an air blower which works together to absorb excess heat and dissipate this heat out of the controller’s housing unit. The rated current used by this controller is about 200 Amperes. Also, the maximum permissible temperature at which this controller can be operated is +55 degrees Celsius. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Wake Industrial Warranty
