DDC01.2-N200A-DL02-01-FW

Product Description

The Rexroth DDC01.2-N200A-DL02-01-FW is a DDC series servo drive. It is a three-phase drive which is microprocessor controlled. An integrated signal processor performs all drive control and parameterization functions. As it is IP 65 rated, the DDC01.2-N200A-DL02-01-FW can be installed directly at the feeder which helps to avoid long cables that are susceptible to damage. DDC servo drives have a module architecture comprised of a basic unit and slots for plug in module. Two of the slots on the basic unit are reserved: these include slot U1 for a command module and slot U5 for the software module. The three remaining slots can be used for auxiliary modules to match the drive to the customer requirements. The firmware for each drive needs to be ordered separately from the hardware. This is required to ensure that the features supported by the firmware are those that are required by the respective customer.

The function code for the DDC01.2-N200A-DL02-01-FW is 02. The function code version for the drive is 01. The command module on the drive is a single axis positioning module. Feedback is supported through integrated digital servo feedback. Continuous and peak current ratings for the DDC01.2-N200A-DL02-01-FW are 50 Amps and 200 Amps respectively. The continuous mechanical load which the DDC01.2-N200A-DL02-01-FW can handle is 7.5 kilowatts. Rated output data are valid for ambient conditions recommended by the manufacturer: these include maximum elevation of 1000 meters and +5 to +45 degrees Celsius temperature. The internal temperature of the DDC01.2-N200A-DL02-01-FW is higher than the external temperature. Therefore the external temperature thresholds are specified to ensure that the internal temperature does not reach critical levels which could lead to drive damage. This unit can be shipped globally with a one-year warranty period from Wake Industrial.