DDC01.2-N100A-DL40-01-FW

Product Description

The Rexroth DDC01.2-N100A-DL40-01-FW is a drive controller. It comes in a IP 65 rated housing. To avoid long cable runs, it can be directly mounted to the feeding device. Mechanical specifications of controller include shipping weight for the basic unit of 22 kilograms and dimensions at 517 x 165 x 298 millimeters. A configuration rating plate is located on the front of the controller. The slot for the software module is located adjacent to the rating plate. The software module can be duplicated for drives with similar configuration. It can also be moved to a replacement drive if required. A fault reset key and status display are located next to the software module slot. Four additional slots for the command module and plug in modules, a RS-232 interface for connecting a VT-100 terminal or PC, analog inputs and outputs and motor feedback connection interface are also located on the front panel.

Command communication module installed on the DDC01.2-N100A-DL40-01-FW is single-axis positioning control. Integrated motor feedback is supported by the controller. Noise emission rating of the DDC01.2-N100A-DL40-01-FW is standard. The controller can be connected directly to AC mains at 220 / 230 Volts AC. An isolated transformer can be used to protect the controller from anomalies in the AC mains supply. Peak output current rating of the DDC01.2-N100A-DL40-01-FW is 100 Amps and the continuous output current is 35 Amps. The usable mechanical peak load which the controller can handle is 17 kilowatts. The continuous mechanical load which the controller can handle is 6 kilowatts. Permissible ambient temperature range for rated specifications is 5 to 45 degrees Celsius. The peak ambient temperature for derated specifications is 55 degrees Celsius.