DDC01.2-N100A-DA01-01-FW

Product Description

The DDC01.2-N100A-DA01-01-FW is a configured DDC drive controller from Bosch Rexroth Indramat. A basic drive controller unit accommodates a positioning module, auxiliary plug-in modules and a software module. These modules can be adapted in the U1 – U5 slots available on this DDC drive controller to accommodate app-specific requirements. The DDC01.2-N100A-DA01-01-FW comes with a bleeder resistor - required for the transformation of the energy generated during braking for control voltages, and it also has a Direct Current (DC) Bus Rectifier. It utilises a DSM software module that holds parameters that aids the pairing of mechanical systems and motors of the drive controller.

The drive parameters and operating software stored on the DSM module of the DDC01.2-N100A-DA01-01-FW can be transferred to another DDC unit should a replacement be necessary. It features a rated current of 100 Amperes, and its noise emission at the motor is standard and at a rated current of 100 – 200 Amperes. The feedback mechanism available to the DDC01.2-N100A-DA01-01-FW is the digital servo type. Additionally, it leverages an ANALOG interface command module. The function code of this unit is 01, and its function code version is 01.

The firmware of the DDC01.2-N100A-DA01-01-FW must be ordered separately. It has an average continuous current of 35 Amperes and a pulse frequency of 4 kHz. Also, it has a continuous bleeder power of 0.25 kW and a peak bleeder power of 20 kW. A basic unit weighs approximately 22 kg. During installation, the maximum permissible height for optimum operations is rated at 1000 meters/sea level. The design and structural makeup of the DDC01.2-N100A-DA01-01-FW corresponds to the IP 65 protection category. Also, its permissible RH is maximum at 95%.This unit can be shipped globally with a one-year warranty period from Wake Industrial.