Product Description
Bosch Rexroth is an international manufacturer of drive control units and industrial motors.
The DDC01.2-N050C-DL30-01-FW is a drive control platform that is designed to be integrated with the DLC single axis positioning module. The rotor of industrial motors can be controlled within a broad speed range with this drive controller. This model provides comprehensive diagnosis features, drive control capability, drive monitoring functions, and allows parameterization. This model has been equipped with a DSM software module. The software module is capable of storing the drive parameters in addition to storing the operating system. There are a variety of platforms that can be programmed with this device. These include the IDA decade switch unit, a CTA programming module, a SOT terminal, a PLC system, and a higher ranking PC. Operators can choose any suitable programming language for this device. Up to 3000 different programming blocks are supported with this system.
The DDC01.2-N050C-DL30-01-FW is protected in accordance with the IP 65 ingress protection protocols which has two main advantages. Firstly, the device can be installed directly at the forward feed units which removes any requirement to install lengthy cables and extensive wiring. Secondly, the drive controller can withstand exposure to water jets, debris, emulsions, oils, non-corrosive particles, etc. This drive controller can be programmed with multiple programming blocks that include position entries, speed entries, output markers for motion sequences, and input series. Multiple types of auxiliary plug-in modules can be inserted into this model. The device can be connected with an inter bus S data highway with the help of a DBS 2.2 plug-in card. By using the DEA 4.1 plug-in card, the E-stop input feature can be activated. This unit can be shipped globally with a one-year warranty period from Wake Industrial.