DDC01.1-K050A-DL22-01-FW

Product Description

The DDC01.1-K050A-DL22-01-FW AC servo drive made by Bosch Rexroth supports connectivity to a PC or a VT-100 terminal through an RS-232 interface connection on its front. This product encompasses a configuration rating plate and a basic unit rating plate on the front panel. It is integrated with a one-axis positioning module. The device is insusceptible to circuitry interference and systems. The control and signal cables of the unit must have a minimum routing distance of 10cm from the power cables. This drive is braked at maximum torque by its electronics in a regulated manner when there is an emergency stop.

The servo drive features a mains section for the control voltages. Its bleeder resistor absorbs the energy that is generated during the braking process. Multiple drives can be combined with a single power supply unit to form a drive package if the drive controller has a modular housing. This product may get damaged if the data mentioned on the configuration rating plate does not match with the plug-in modules inserted in the drive controller. The power supply connection is located below the device and is done through the X7 connector. The unit features a 50A current rating. We can ship the DDC01.1-K050A-DL22-01-FW servo drive globally with warranty support for a year.

The AC drive can be fitted to an AC servomotor with digital servo feedback and a multiturn encoder. The heatsink and blower of the drive can become dirty with foundry dust if it functions in a polluted area. The flammable parts of the product must be kept at a distance of at least 300mm from the air outlet to avoid being affected by the hot air stream. The IP 65 level of protection gets adversely affected in case of improper insertions of the feedback cable as well as plug-in modules.