Product Description
Bosch Rexroth has the products and technology to get the job done correctly. With Bosch Rexroth products, you are sure of receiving the best value for your money.
The CSH01.3C-PL-ENS-MA1-CCD-S2-S-NN-FW model has a minimum SERCOS cycle time of 250 microseconds and two analog outputs. This model is a component of an advanced single-axis drive controller used in printing, packaging, food processing machine tools, handling systems, and mounting systems. The CSH01.3 control section is integrated with a parallel interface communication module that consumes 1 W. The dimensions of the model are 103mm (width) x 49.5mm (depth) x 241mm (height) (height). A qualified technician must install and operate the model under specified environmental conditions. This device is equipped with four digital outputs and eleven digital inputs. The model has one analog input and one relay contact. Option 2 is an analog extension I/O, whereas option 3 is a cross-communication drive. The model is an important component of the Rexroth drive system and has a single serial interface. Option 1 encoder for the CSH01.3 control section is an IndraDyn/hiperface/1 Vpp encoder consuming 6 W. Drive controllers are often sent with the control section. Nevertheless, control sections may also be given on their own.
The model CSH01.3C-PL-ENS-MA1-CCD-S2-S-NN-FW has an inrush current of 4 amps and power consumption of 7.5 watts. Using the cycle time function, you may modify the velocity between 125 and 250 microseconds, the current between 62.5 and 125 microseconds, and the position between 250 and 500 microseconds. The device has a standard control panel and programmable firmware (which must be purchased separately). The model (CSH01.3C-PL-ENS-MA1-CCD-S2-S-NN-FW) may not be used for activities not explicitly permitted by Rexroth.
Wake Industrial Warranty
