CSH01.2C-NN-ENS-NNN-CCD-NN-S-NN-FW

Product Description

The CSH01.2 control unit is a part of the family of advanced variants developed by Bosch Rexroth. The company has played a big part in revolution of automation industry. The typical applications for this model include printing machines, food machines, mounting systems and paper processing machines. The CSH01.2C-NN-ENS-NNN-CCD-NN-S-NN-FW model is a configurable advanced control section sold by Rexroth Indramat. The CSH01.2 control section can be powered by a power section, identified by the name plate attached. The firmware is necessary for accurate positioning of the motor and operation of the drive controller. The firmware must be acquired as a separate sub-position and installed by a trained professional. The ‘ENS’ in the type code denotes support for encoders interfaces including EnDat 2.1, 1Vpp and TTL. It comes without the additional safety features and offers a standard control panel with a single-line display. The size of this module is measured to be 103mm deep, 49.5mm wide, and 241mm high. For secure mounting, use the recommended screw size and tightening torque. The model CSH01.2C-NN-ENS-NNN-CCD-NN-S-NN-FW offers better control with the switchable frequencies in range of 2 to 16 kHz. The device offers cycle times of 62.5 to 125 ms and velocity cycle of 125 to 250 ms. This model has 2 number of analog outputs and 1 relay contacts. The connection point X7 can be used for memory card slot. This slot offers attachment of memory card that stores various programs for the operation. The permissible installation conditions include ambient temperature in range of 0 to +45 degree Celsius at an altitude of 1000 meters above sea level. This model is not protected against water and other liquids, therefore, it must be installed in a separate control cabinets.