CSH01.2C-NN-ENS-MEM-CCD-S1-S-NN-FW

Product Description

The CSH01.2C-NN-ENS-MEM-CCD-S1-S-NN-FW advanced control section permits configuration according to the needs of the application. This Bosch Rexroth section has a few combined digital inputs/outputs. The product needs no external power supply for its encoder signals. This device installation must comply with the instructions in the documentation. The unit triggers interference of high frequency in residential areas. It is important to adhere to the safety requirements and regulations of the country in which it is operated. This section is to be switched on only after ensuring that its protective guards and covers are fitted. The product must have no power connection during an extended period of discontinued use.

This device should neither be crushed nor jammed to avoid the possibility of injury. The unit is equipped with a single axis. Its control panel uses batteries that should never be reactivated by heating. This section features position, velocity and current control cycle times based on the associated firmware. The product is highlighted by a separate slot for inserting the multimedia card for memory. This device features rapid inputs in the form of probe inputs. The unit has a maximum 500mA allowed output current for each digital output. Its digital outputs have an update interval depending on the firmware. This control section has a warranty for one year.

The product uses a cable with shield at both ends for connection using its analog input. This device has two analog voltage outputs with an output voltage ranging between 0V and 5V. The unit uses its serial interface during servicing and commissioning for parameterization, programming as well as diagnosis. Its serial interface can also be used to establish a connection with a PC. This section comprises spring terminals that must be wired using wire ends without ferrules as far as possible. It is possible for this control section to be sent to any preferred address of your choice.